- #Iridient x transformer serial number software#
- #Iridient x transformer serial number mac#
There is an option in X-Transformer to use Lossless compression. At least, that’s my understanding of how it works. This is what is happening during the conversion process, and so you go from having one set of data, and the filter layout, to having three individual channels of information (red green and blue) so the file will inevitably be larger. This is combined with the information about where each colour element is in the colour filter, and when you use these two bits of information, you can reconstruct an image from the data. In other words, you have only one channel of data really in a raw file.
Because the filter is fixed, that information is used in combination with the light data to create the image. Colour is handled by the colour filter which is placed over these. It is just a data representation of the amount of light hitting the sensor at each of the sensors photo sites.
This data doesn’t actually contain individual colour channels. A Raw file effectively stores the raw data directly off the image sensor.
This isn’t a fault of the software or bad programming. Using X-Transformer to convert to DNG increases the size of the final files a little. If you’re finding hat your computer is sluggish during use, and you need to use it for other things, then using this option should help. Luckily the developer included an option to reduce processor usage, and you can find it in the Settings menu. Of course, this can be a bit of an issue if you’re trying to do anything else at the time, it pretty much takes over your computer. X-Transformer seems to be very well multithreaded, so if you have a multicore or multi- processor computer, it will use all available CPU resources. As soon as you add images to it, it will start processing, so be sure to change your settings first. You should set your settings before you do anything else, and then add your images to the software. Here are some more tips for using X-Transformer, in no particular order Apply Settings First
Lens Correction Options: Check All Three. Lens Correction:Include as DNG metadata. RAW Process: Smoother (I find this works best if you’re applying sharpening - otherwise the images appear over-sharpened). Here are the settings that I use in Iridient t X-Transformer By applying a small amount of sharpening during the conversion process, you can keep your settings fairly low in Lightroom, and in most cases, the defaults will work. In my experience, the third option is the best. A third option is to do a low level of sharpening and noise reduction in the software, and then do another level in Lightroom. Alternatively, you can set sharpening and noise reduction parameters in X-Transformer, and turn them off in Lightroom. You can do no processing during the conversion, and then do all the sharpening and so on in Lightroom. Approaches to useīecause of the variety of options and settings, there are many different ways that you can approach using Iridient X-Transformer. You can also choose to add lens correction, or just embed the data in the DNG file and let Lightroom handle the process. You can decide just to demosaic the files or, apply various degrees of sharpening and noise reduction. The software lets you set lots of settings to apply during the decoding process. It effectively lets you use Iridient’s decoding engine in Lightroom. This way, when you import the resulting files into Lightroom, you’re bypassing the Lightroom raw decoding process, but you are still able to use the files as if they were raw files. This process converts the RAW data to RGB data but retains the advantages of using a raw file, such as highlight recovery and so on. The software converts Fuji X-Trans files to DNG from the native RAF, and during the process demosaics the images using Irident’s own engine. If you haven’t used it before, or come across it, Iridient X-Transformer is a new piece of software (currently still in beta) from the makers of Iridient Developer. However, if you’re looking for somewhere to start, then have a look, try the recommendations, and judge for yourself. As always, I based these on my preferences, and so, you may prefer a different approach. In this post, I’ll outline the settings that I’m now using and some other tips for using the software. After lots of testing and trying various combinations, I’ve come up with what I believe is the best approach to take if you prefer natural looking images. Now that Iridient X-Transformer has been out on the Mac for a little while I’ve had a chance to play around with it for a bit.
0 kommentar(er)
